TITANIUM FLANGE

ANOUT TITANIUM FLANGE

The titanium flange is a part made of titanium or titanium alloy of non-ferrous metal, which connects the pipe to the pipe and is connected to the pipe end.

There are holes in the titanium flange, and the bolts make the two flanges tightly connected. The flanges are sealed with gaskets. Flange fittings, refer to fittings with flanges (flanges or lands).

It can be cast or it can be made by screwing or welding. Flange (joint) consists of a pair of flanges, a spacer and several bolts and nuts. The gasket is placed between the two flange sealing surfaces. After the nut is tightened, the specific pressure on the surface of the gasket reaches a certain value and then deforms, and fills the unevenness on the sealing surface to make the joint tight.

TECHNICAL PARRAMETERS

Status: Cold Processed State (Y) / Annealed State (M)

Advantages of titanium: good corrosion resistance, low density and high strength

Production process: forging

Uses: Flanges are a type of connector for pipes, valves, equipment, petrochemical plants

  • 1.Flat welding flange, neck butt welding flange and integral flange are equipped with valves.
  • 2.With neck flat welding, socket welding flange used in petrochemical plants.
  • 3.Threaded flange is more commonly used in engineering construction, easy to install without welding.
  • 4.Loose flanges and flange covers are used in corrosive piping systems. (Flange cover is used at the end of the pipe or as a head)

PRODUCT DETAIL PICTURE

Continuous update…