Ti-6-al4v titanium bar M bright surface

Quick Details:

Supply Ability

Supply Ability:20 Ton/Tons per Month

Technical Parameters

Product Picture:

Titanium rod spot specifications

Diameter: 2.4mm/3mm/4mm/6mm/8mm10mm/12mm/13mm/14mm/15mm 18mm/20mm/25mm/30mm/35mm. Length: 1000-3000mm Other specifications can be customized, long-term preparation of a large number of semi-finished products, short delivery time .

Characteristics of titanium

Titanium can be subjected to various pressure processing such as forging, rolling, extrusion, stamping, etc. In principle, the equipment used for heating steel can be used for heating titanium, and the atmosphere in the furnace is required to maintain a neutral or weak oxidizing atmosphere. Heated with hydrogen.
Titanium has a higher yield ratio (σ0.2/σb), generally between 0.70 and 0.95, and the deformation resistance is large, while the elastic modulus of titanium is relatively low. Therefore, titanium is difficult to process. Pure titanium has good welding properties, and the weld strength, ductility and corrosion resistance are similar to those of the base metal. In order to prevent contamination during welding, tungsten argon shielded welding is required.
The cutting process of titanium is difficult. The main reason is that the friction coefficient of titanium is large, the thermal conductivity is poor, and the heat is mainly concentrated on the tip of the blade, so that the tip is softened quickly. At the same time, the chemical activity of titanium is high, and the temperature rises to easily adhere to the tool, resulting in bond wear. When cutting, the tool material should be properly selected to keep the tool sharp and use a good cooling process.

Characteristics of titanium rods

Titanium alloys are mainly used to make aircraft engine compressor components, followed by structural components for rockets, missiles and high-speed aircraft. In the mid-1960s, titanium and its alloys were used in the general industry for the production of electrodes for the electrolysis industry, condensers for power stations, heaters for petroleum refining and seawater desalination, and environmental pollution control devices. Titanium and its alloys have become a corrosion resistant structural material. It is also used to produce hydrogen storage materials and shape memory alloys.
1. The density is small and light. (4.51)
2, no magnetic.
3, used in -273 ° to 500 ° working environment, high strength.
4: implanted in the human body, there is no exclusion.
Titanium rod production grade: American label: GR1, GR2, GR3, GR4, GR5, GR7, GR12, GR23
Titanium rod manufacturing process:
Smelting-opening-grinding-forging-rolling-car light/polishing hot forging-hot rolling-car light (buffing)
Titanium rods perform standards:
American Standard: ASTM B348, ASTM F136, ASTM F67, AMS4928

Export Packing

Payment Methods:

FAQ

Q:How to get titanium bar suitable for me?
A:Check the details and click on send us Website form or email (anber@bjhighstar.com) and tell us the specification,grade and quantity you need. We will respond to you within 2 hours and give you the best offer.

Q:What are the classification of titanium bar?
A:gr2 gr1 pure titanium bar,gr5,gr7,gr9 titanium alloy bar etc,standard:ASTM B348 ETC…

Q:How long is your delivery time?
A:If it is in stock, we will ship it within 2 days. If it isnot in stock, the construction period is about 7-15 days.

Q:What is the payment method?
A:We support wire transfer, T/T, credit card payment, PayPal, Payoneer,Western Union.

Q:Is it possible to provide free samples?
A:Of course,We can send free samples for your test according to your needs, you only need to pay a small amount of shipping.

Production equipment

Processing workshop

Titanium surface treatment

1, enhanced corrosion resistance treatment:
Atmospheric oxidation treatment and anodizing treatment; not only can improve corrosion resistance, but also prevent hydrogen embrittlement; in addition, platinized, palladium oxide / titanium oxide treatment;
2, improve wear resistance:
Above; by surfacing, an appropriate amount of nitrogen or oxygen is added to the argon gas to increase the surface hardness by 2-3 times; by ion plating, a titanium nitride is formed on the surface, and the thickness is about 5 μm. Vickers hardness is as high as 16,000-20,000 chrome plating; through the above simple understanding of titanium and its alloys, we will also understand the role of titanium and its alloys in the production of circuit boards, which will be instructive in terms of use and maintenance; Titanium has become the third largest future application prospect after magnesium and aluminum as a wide range of metals!
Among biomedical metal materials, titanium and its alloys are excellent joint performance, such as artificial joints, bone trauma products, spinal orthopedic internal fixation systems, dental implants, dental trays, artificial heart valves, interventional cardiovascular stents, etc. The preferred material for endophytic products, currently, there is no better metal material than titanium for clinical use. In the past 10 years, the market growth rate of biomedical materials and products has been maintained at around 20-25%. It is expected that in the next 10-15 years, the medical device industry including biomedical materials will reach the scale of the pharmaceutical products market and become the 21st century. The pillar industry of the world economy.
Titanium rods and titanium alloy materials have been used more and more widely in biomedicine, daily necessities, and industrial fields in recent years. At the same time, titanium alloy material is also a new important layout material used in the aerospace industry. The specific gravity, strength and operating temperature are between aluminum and steel, but the specific strength is high and it has excellent seawater corrosion resistance and ultra-low temperature function. Titanium alloys are typically used in aero engines at 20% to 30% of the total weight of the layout. They are primarily used to make compressor components such as cast titanium fans, compressor discs and blades, cast titanium compressors, intermediate machines, Bearing housing, etc. The spacecraft primarily uses titanium alloys with high specific strength, corrosion resistance and low temperature resistance to produce a variety of pressure vessels, fuel tanks, fasteners, instrument straps, frames and rocket housings. Artificial earth satellites, lunar modules, manned spacecraft and space shuttles also use titanium alloy sheet welded parts.

Free to contact us