GRADE 2 pure titanium Hexagonal rod
FOB Reference Price
$22 – $26.5 / kg | 1 kg (Min. Order)
Lead time： Stock/within 7-20 days
Shipping： Provide air or sea freight services as needed
Sample: Manufacturer provides proofing service
Packaging: Standard export packaging service
Place of Origin
Aerospace, industry, medical
Powder Or Not:
Other titanium grade
Supply Ability:20 Ton/Tons per Month
Titaniun bar and Titanium square rod and titanium hexagon rod
Titanium & Titanium Alloy bar/rod
ASTM B348、ASTM F136、ASTM F67、AMS4928
Standard wooden box Packaging
Industrial, Heating Exchanging, Condenser, Medical, Chemical, Aerospace, Oil, Sports, Bike etc.
Introduction to titanium rod
American label: GR1, GR2, GR3, GR5, GR7, GR12 Delivery status: Hot working state (R) Cold working state (Y) Annealing state (M) Solid solution state (ST packaging: bale or wooden box packaging) Surface Treatment: Polishing or passing the surface quality: high precision, good finish, no oxide layer, pits, no cracks, folding, rolling, crusting, separation, hairline and other defects. Surface finish: clean, dust-free, and better acid-resistant service life. Physical properties: better elongation and strength properties. Testing: physical property testing, hardness testing, chemical composition testing.
Titanium production process
At present, the industrial method for the production of titanium metal is the Raul method, and the product is titanium sponge. The traditional process for making titanium is to melt the sponge titanium into an ingot and then process it into a titanium material. According to this, the main steps from the mining to the process of making titanium are: titanium ore -> mining -> mineral processing -> too concentrate -> enrichment -> titanium-rich material -> chlorination -> coarse TiCl4-> Refined->Pure TiCl4->Magnesium Reduction->Sponge Titanium->Fused Casting->Titanium Ingot->Processing->Titanium or Titanium Parts If the mining process is rutile in the above steps, it is not necessary to carry out enrichment and can directly carry out chlorine. The crude TiCI4 was obtained. In addition, the casting operation should be a metallurgical process, but sometimes it is also classified into the processing technology. The processing in the above process refers to plastic processing and casting. Plastic processing methods include forging, extrusion, rolling, stretching, and the like. It can process titanium ingots into various sizes of cakes, rings, plates, pipes, rods, profiles and other products, and can also be used to make parts and parts of various shapes by casting method. The plastic working of titanium and titanium alloy has large deformation resistance; the plasticity at room temperature, the yield limit and the strength limit ratio are high, the rebound is large, the gap is sensitive, the deformation process is easy to bond with the mold, and the harmful gas is easy to suck when heated. Plastic processing is more difficult than steel and copper. Therefore, the processing of titanium and titanium alloys must take into account these characteristics. Titanium is plastically processed, the size of the soil is not limited, and it can be mass-produced, but the yield is low, and a large amount of waste residue is generated during the processing. In view of the above shortcomings of titanium plastic working, a powder metallurgy process of titanium has been developed in recent years. The powder metallurgy process of titanium is the same as ordinary powder metallurgy, except that the sintering must be carried out under vacuum. It is suitable for the production of large-volume, small-sized parts, especially for the production of complex parts. This method requires almost no processing, and has a high yield. It can fully utilize titanium scrap as a raw material and reduce production costs, but cannot produce large-sized titanium parts. The powder metallurgy process of titanium is: titanium powder (or titanium alloy powder) -> sieve -> mixing -> press forming -> sintering -> auxiliary processing -> titanium products. Principle Process for Titanium Production In addition to pure titanium, titanium has produced nearly 30 grades of titanium alloys in the world. The most widely used titanium alloys are Ti-6Al-4V, Ti-5Al-2.5Sn, etc.
Characteristics of titanium rods
Titanium alloys are mainly used to make aircraft engine compressor components, followed by structural components for rockets, missiles and high-speed aircraft. In the mid-1960s, titanium and its alloys were used in the general industry for the production of electrodes for the electrolysis industry, condensers for power stations, heaters for petroleum refining and seawater desalination, and environmental pollution control devices. Titanium and its alloys have become a corrosion resistant structural material. It is also used to produce hydrogen storage materials and shape memory alloys.
1. The density is small and light. (4.51)
2, no magnetic.
3, used in -273 ° to 500 ° working environment, high strength.
4: implanted in the human body, there is no exclusion.
Titanium rod production grade: American label: GR1, GR2, GR3, GR4, GR5, GR7, GR12, GR23
Titanium rod manufacturing process:
Smelting-opening-grinding-forging-rolling-car light/polishing hot forging-hot rolling-car light (buffing)
Titanium rods perform standards:
American Standard: ASTM B348, ASTM F136, ASTM F67, AMS4928
Q:How to get titanium bar suitable for me?
A:Check the details and click on send us Website form or email (firstname.lastname@example.org) and tell us the specification,grade and quantity you need. We will respond to you within 2 hours and give you the best offer.
Q:What are the classification of titanium bar?
A:gr2 gr1 pure titanium bar,gr5,gr7,gr9 titanium alloy bar etc,standard:ASTM B348 ETC…
Q:How long is your delivery time?
A:If it is in stock, we will ship it within 2 days. If it isnot in stock, the construction period is about 7-15 days.
Q:What is the payment method?
A:We support wire transfer, T/T, credit card payment, PayPal, Payoneer,Western Union.
Q:Is it possible to provide free samples?
A:Of course,We can send free samples for your test according to your needs, you only need to pay a small amount of shipping.
Basic knowledge of titanium
It took more than a hundred years from the discovery of titanium to the production of pure products. The true use of titanium, knowing its true face, is the future work of the 1940s. In the ten-kilometer-thick layer of the mantle, the titanium content is six thousandths, which is 6 times more than copper. Grab a handful of mud from the ground, which contains a few thousandth of titanium. It is not rare for the world to store more than 10 million tons of titanium. There are hundreds of millions of tons of sand and gravel on the beach. Titanium and zirconium are two kinds of minerals that are heavier than sandstone. They are turbid and turbid in sand and gravel. They are washed through the sea for millions of years and nights. The mine and the zircon sand mine rush together, forming a piece of titanium ore and zirconium on the long shore. This layer of mineral is a black sand, usually a few centimeters to tens of centimeters thick. Titanium is not magnetic, and nuclear submarines made of titanium do not have to worry about magnetic intrusion. In 1947, people began to smelt titanium in the factory. In that year, the output value was only 2 tons. In 1955, the output value surged to 20,000 tons. In 1972, the annual output reached 200,000 tons. Titanium has a hardness similar to that of steel, and its composition is almost half that of the same volume of steel. Although titanium is slightly heavier than aluminum, its hardness is twice that of aluminum. Now, in the world of rockets, many use titanium instead of steel. According to statistics, the world’s annual titanium used in the world’s flight has reached more than 1,000 tons of very fine titanium powder, which is still a good fuel for the rocket, so titanium is known as the world metal, space metal.
Titanium has good heat resistance and its melting point is as high as 1725 °C. At normal temperature, titanium can be safely placed in a variety of strong acid and alkali solutions. Even the most ferocious acid – it can’t erode it. Titanium is not afraid of sea water. Someone once sank a piece of titanium to the bottom of the sea. In the next five years, it took a look. There were many small animals and seabed plants stuck on it, but there was no rust at all, and it was still sparkling. Now, people started to use titanium to make a submarine, a titanium submarine. Because the titanium is very strong and can withstand high pressure, the submarine can fly in deep seas as deep as 4,500 meters.
Titanium is corrosion resistant, so it is often used in the chemical industry. Stainless steel parts are used in chemical reverberators. Stainless steel is also afraid of the intense corrosive agent – hot nitric acid, which will be replaced every six months. Now, using titanium to make these parts, although the cost is more expensive than the stainless steel parts, but it can be used continuously for five years, the calculation is much more cost-effective. The biggest drawback of titanium is that it is difficult to refine. First and foremost, titanium is extremely strong at high temperatures and can be combined with oxygen, carbon, nitrogen and many other elements. Thus, regardless of the time of smelting or casting, people are careful to avoid these elements “invading” titanium. In the time of smelting titanium, the air and water are of course severely stopped, and even the alumina crucible commonly used in metallurgy is stopped, because titanium will extract oxygen from the alumina. Nowadays, people use magnesium to react with inert gas, helium or argon, to extract titanium. People use the characteristics of titanium to combine at high temperatures. In the steelmaking process, nitrogen is easily dissolved in molten steel. When the ingot is cooled, bubbles form in the steel ingot, which affects the quality of the steel. Therefore, the steelworker adds titanium metal to the molten steel to make it combine with nitrogen to form a slag, titanium nitride, which floats on the surface of the molten steel, so that the steel ingot is relatively pure. When a supersonic aircraft flies, its wings can reach a temperature of 500 °C. If you use a more heat-resistant aluminum alloy to make the wing, one to two or three Baidu will not be able to eat, it is necessary to have a light, tough, high temperature resistant material to replace the aluminum alloy, just to meet these requirements. Titanium can withstand more than one hundred degrees of detection. At this low temperature, titanium still has good resistance without being brittle. The strong absorption of air by titanium and zirconium removes air and creates a vacuum. For example, using a vacuum pump made of titanium, the air can be pumped to only one part per million. Titanium oxide, titanium dioxide, is a white powder and is the best white pigment, commonly known as titanium dioxide. Once upon a time, people first explored titanium ore, in order to obtain titanium dioxide. Titanium white has strong adhesion, is not easy to change chemically, and is always white. Particularly valuable is titanium white non-toxic. It has a high melting point and is used to make fire-resistant glass, glaze, enamel, clay, and high-temperature test vessels. Titanium dioxide is the whitest thing in the world, and 1 gram of titanium dioxide can coat more than 450 square centimeters. It is five times whiter than the commonly used white pigment, zinc white, and is therefore the best pigment for white paint. Titanium dioxide used as a pigment in the world, from more than a few hundred thousand tons a year. Titanium dioxide can be added to paper to make the paper white and opaque, and the effect is 10 times larger than other materials. Therefore, titanium dioxide is added to paper and art paper. In addition, in order to make the color of the plastic lighter, the artificial silk is soft, and titanium dioxide is sometimes added. In the rubber industry, titanium dioxide is also used as a filler for white rubber. It is a funny liquid, it has a pungent smell, and it will be white smoke in the humid air – it hydrolyzes and turns into a white titanium dioxide hydrogel. In the military, people use this temper as an artificial aerosol. Especially in the ocean, the water is more gas, and the smoke is like a white Great Wall, blocking the enemy’s vision. In agriculture, people use titanium tetrafluoride to prevent frost. Titanate crystals have such a characteristic that when it is subjected to pressure and changes its shape, an electric current will occur, and a current will change the shape. Therefore, people put the titanic acid in the ultrasonic wave, it generates a current when it is pressed, and the intensity of the ultrasonic wave can be detected by the magnitude of the current generated by it. Instead, ultrasonic waves can be generated by passing high frequency current through it. Titanic acid is now used in almost all ultrasonic instruments. In addition, titanic acid has many uses. For example, a railway worker puts it under the rails to measure the pressure of the train passing through the time; the physician uses it to make a pulse recorder. The underwater detector made of titanic acid is a sharp underwater eye. It can not only see the fish, but also the reefs under the water, icebergs and enemy submarines. When smelting titanium, it is necessary to pass the messy process. The ilmenite is turned into a sealed stainless steel tank and filled with argon gas to make them react with the magnesium metal to obtain “sponge titanium”. Such porous “sponge titanium” cannot be directly used, and it is necessary to melt them into a liquid in an electric furnace before they are cast into a titanium ingot. But how to make this electric stove is simple! In addition to the need to clean the air in the electric furnace, it is even more troublesome. It is almost impossible to find a crucible containing liquid titanium. Since the general refractory part contains oxides, the oxygen in between will be taken away by the liquid titanium. Later, people finally invented a “water-cooled copper gong” electric furnace. As long as a part of the center of the electric furnace is very hot, the rest is cold. After melting in an electric furnace, the titanium flows to the wall of the copper crucible cooled by water and immediately condenses into a titanium ingot. In this way, a few tons of titanium can now be produced, but its cost can be imagined.
Free to contact us
Country / Region
Titanium material/anode/tube/bar/plate/pipefitting/CNC parts/bolts/foam
11 – 50 People
Total Annual Revenue
US$2.5 Million – US$5 Million
Europe Market 18.5.00%
North America 37.00%
South America 26.5.00%
No. of Employees in Trade Department
Average Lead Time
Total Annual Revenue
US$2.5Million – US$5 Million
Accepted Delivery Terms
FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
Accepted Payment Currency
USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY
Accepted Payment Type
T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Western Union, Cash, Escrow
Tianjin, Shanghai, Ningbo