gr5 Medical titanium bar ASTM F136

Quick Details:

Supply Ability

Supply Ability:20 Ton/Tons per Month

Technical Parameters

Product Picture:

Titanium rod spot specifications

Diameter: 2.4mm/3mm/4mm/6mm/8mm10mm/12mm/13mm/14mm/15mm 18mm/20mm/25mm/30mm/35mm. Length: 1000-3000mm Other specifications can be customized, long-term preparation of a large number of semi-finished products, short delivery time .

Characteristics of titanium

Titanium can be subjected to various pressure processing such as forging, rolling, extrusion, stamping, etc. In principle, the equipment used for heating steel can be used for heating titanium, and the atmosphere in the furnace is required to maintain a neutral or weak oxidizing atmosphere. Heated with hydrogen.
Titanium has a higher yield ratio (σ0.2/σb), generally between 0.70 and 0.95, and the deformation resistance is large, while the elastic modulus of titanium is relatively low. Therefore, titanium is difficult to process. Pure titanium has good welding properties, and the weld strength, ductility and corrosion resistance are similar to those of the base metal. In order to prevent contamination during welding, tungsten argon shielded welding is required.
The cutting process of titanium is difficult. The main reason is that the friction coefficient of titanium is large, the thermal conductivity is poor, and the heat is mainly concentrated on the tip of the blade, so that the tip is softened quickly. At the same time, the chemical activity of titanium is high, and the temperature rises to easily adhere to the tool, resulting in bond wear. When cutting, the tool material should be properly selected to keep the tool sharp and use a good cooling process.

Characteristics of titanium rods

Titanium alloys are mainly used to make aircraft engine compressor components, followed by structural components for rockets, missiles and high-speed aircraft. In the mid-1960s, titanium and its alloys were used in the general industry for the production of electrodes for the electrolysis industry, condensers for power stations, heaters for petroleum refining and seawater desalination, and environmental pollution control devices. Titanium and its alloys have become a corrosion resistant structural material. It is also used to produce hydrogen storage materials and shape memory alloys.
1. The density is small and light. (4.51)
2, no magnetic.
3, used in -273 ° to 500 ° working environment, high strength.
4: implanted in the human body, there is no exclusion.
Titanium rod production grade: American label: GR1, GR2, GR3, GR4, GR5, GR7, GR12, GR23
Titanium rod manufacturing process:
Smelting-opening-grinding-forging-rolling-car light/polishing hot forging-hot rolling-car light (buffing)
Titanium rods perform standards:
American Standard: ASTM B348, ASTM F136, ASTM F67, AMS4928

Export Packing

Payment Methods:

FAQ

Q:How to get titanium bar suitable for me?
A:Check the details and click on send us Website form or email (anber@bjhighstar.com) and tell us the specification,grade and quantity you need. We will respond to you within 2 hours and give you the best offer.

Q:What are the classification of titanium bar?
A:gr2 gr1 pure titanium bar,gr5,gr7,gr9 titanium alloy bar etc,standard:ASTM B348 ETC…

Q:How long is your delivery time?
A:If it is in stock, we will ship it within 2 days. If it isnot in stock, the construction period is about 7-15 days.

Q:What is the payment method?
A:We support wire transfer, T/T, credit card payment, PayPal, Payoneer,Western Union.

Q:Is it possible to provide free samples?
A:Of course,We can send free samples for your test according to your needs, you only need to pay a small amount of shipping.

Production equipment

Processing workshop

Use of titanium sponge

Sponge titanium use is the basic raw material for the production of refined titanium. The titanium sponge is further refined to form a metal titanium material such as a titanium ingot or a titanium rod. Titanium powder can be produced by mechanically grinding titanium sponge. As a coating material, titanium powder is widely used for the surface treatment of mechanical equipment, the processing of electronic and precision instrument components, and the synthesis of titanium alloy powder with other metals.
Sponge metal titanium produced by metal thermal reduction. The purity % (mass) is generally from 99.1 to 99.7. The total amount of impurity element % (mass) is 0.3 to 0.9, the impurity element oxygen % (mass) is 0.06 to 0.20, and the hardness (HB) is 100 to 157, and is classified into five grades of WHTiO to MHTi4 depending on the purity. In order to obtain the main raw materials of industrial titanium alloy. Sponge titanium production is the basic link of the titanium industry, which is the raw material for titanium, titanium powder and other titanium components. The ilmenite is changed to titanium tetrachloride, placed in a sealed stainless steel tank, and filled with argon gas to react them with metallic magnesium to obtain “sponge titanium”. Such porous “sponge titanium” cannot be used directly, and must be melted into a liquid in an electric furnace to be cast into a titanium ingot.
At the end of the eighteenth century, the British pastor and amateur mineralogist William Gregor and the German chemist M.H. Klaproth successively from 1791 and 1795 respectively. A new type of black magnetite ore (later known as titanium magnetite) and a non-magnetic oxide ore (which later became known as the natural rutile mine) was discovered by them as “Munaquin” “(The place name of titanium magnetite is found) and “Titanium soil”. A few years later, it was proved that the so-called “Munaquin” and “Titanium” found in these two minerals are actually oxides of the same element, and this new one is named after the Titans in Greek mythology. The element is “Titanium”. From the discovery of titanium to the first time to produce purer titanium, it has been 120 years. It took another 40 years for the laboratory to obtain pure titanium for the first time to industrial production for the first time. Many researchers have done a lot of exploration and suffered repeated failures. Finally, in 1948 DuPont achieved success and produced tonnage grade titanium sponge.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Free to contact us